Length = 6 cm
Holder thickness = 1 mm
Width = 30 mm
It has four holes for the dowel.
The holder of the gutter on the front plate of Aqueduct ™ has the best design among the drainage systems of metal.
The chute is easily mounted in the holders and is secured with the help of a back bend.
Gutter holder The Aqueduct ™ is convenient to install thanks to 4 recessed holes for the dowel: pre-mounted holders on the frontal surface, easily installed using two oval holes, and only then fixed in position with two round holes.
Superdensity of 1 mm, layered zinc 275 g / m2 and factory color of 35 microns on both sides.
This ensures a 100% match in color and uniform fading with the entire drainage system.
The gutter holder is mounted to the eaves (frontal) roof board.
Colour: RAL 8019
190 грн
Gutter bracket on the frontal board dark brown 150/100
Length = 6 cm
Holder thickness = 1 mm
Width = 30 mm
It has four holes for the dowel.
The holder of the gutter on the front plate of Aqueduct ™ has the best design among the drainage systems of metal.
The chute is easily mounted in the holders and is secured with the help of a back bend.
Gutter holder The Aqueduct ™ is convenient to install thanks to 4 recessed holes for the dowel: pre-mounted holders on the frontal surface, easily installed using two oval holes, and only then fixed in position with two round holes.
Superdensity of 1 mm, layered zinc 275 g / m2 and factory color of 35 microns on both sides.
This ensures a 100% match in color and uniform fading with the entire drainage system.
The gutter holder is mounted to the eaves (frontal) roof board.
Colour: RAL 8019
190 грн
